The 4 Most Unanswered Questions about

The Work of a Stonemason

In stonemasonry, the mason shapes an irregular piece of rock into an accurate structure. Levels, gauge lines and plumb bob are used by stonemasons in order to set vertical and horizontal alignments of the structure they are building. They also layout foundations and wall patterns with the use of rules, staked lines, and a straight edge. Stonemasons also use a chisel, hammers, and power grinder to smooth out rough or defective spots, and use a blowtorch to repair cracked or chipped stone.

If a stonemason will work on a monument, then they have to remove parts of the monument from the truck bed that carries them and using hoists, cranes or even skids, they guide it to the foundation. Then, the stonemason will make parts of the structure with a mixture composed of stone.

There are many types of stonemasons.

The stonemason that works in a quarry splitting rock sheets down their vein so that chunks of stone can be extracted in a quarryman.

The work of a sawyer mason is to take these chunks of rock and shape them using diamond-tipped saws to the required size and shape.

Further honing of the stone is done by a banker mason such that the size and shape is according to that required by the design of the building. Banker masons ensure that the orientation of the shaped stone in the building is the same as it was oriented in the ground.

The carver mason has the artistic ability to create designs and patterns from or in stones like figures, animals, and other types of design.

Permanently fixing stones onto building structures using cement and epoxy resin is the specialization of a fixer mason. In a fixer mason’s job, you are required to work at high altitudes and it requires precise tolerances and so it is highly dangerous and you should be highly skilled as well. A fixer mason will use a tackle lift system in order to manipulate stone pieces that are very heavy.

If you need to carve gravestones, statues, or memorials, then you need the services of a memorial mason.

It is usually outdoors that a stonemason works. With the hazardous work of a stonemason the needs to wear a hardhat and exercise extreme caution. There is great physical demand for this work and during bad weather, there are fewer contracts because of the outside work they do. Because of the advancement in masonry technology, stonemasons can already work outdoors no matter what the weather condition is.

Because you need to climb scaffolding, use hammers and chisels, and spend the day bending, kneeling, and carrying heavy loads through tough terrain, then we can consider the work of a stonemason to be hard physical labor. Often, stonemasons are contracted privately and are given a time schedule to follow. Overtime and weekend work are sometimes necessary to be able to meet deadlines.

stonemasons Perth Award winning stonemasons
perth stonemasons stonemasons in perth
stonemasons Perth Award winning stonemasons
perth stonemasons stonemasons in perth
stonemasons Perth Award winning stonemasons
perth stonemasons stonemasons in perth
stonemasons Perth Award winning stonemasons
perth stonemasons stonemasons in perth